Browse By Product
  Thermal Foggers  
  Cold Foggers  
  Electric Cold Foggers  
  Anileator  
  Sani-Tizer  
  Hurricane  
  Hurricane ES  
  Hurricane w/float  
  Hurricane Ultra  
  Cylcone  
  Cyclone Ultra  
  Cyclone Ultra-Flex  
  Tornado  
  Tornado/Flex  
  Nightstar�  
  Dyna-fog� L15  
  Dyna-Jet� L30  
  Piston Engine ULV  
  Aerial Rotary Atomizers  
  Truck Mount Accessories  
  Options/Accessories  
  Air Powered (Cold Fog)  
  Light Traps  
  Other Products  
  World Representation  
  Warranty Registration  
  Contact US  
   



Contact Us:
Phone: 1-317-896-2561
Fax: 1-317-896-3788
Email: info@dynafog.com
   
Tornado

 


The multi-range Tornado offers a 3 gallon tank, large formulation filter with removable screen and a precision control metering valve that allows adjustable outputs from a heavy mist of 5 gallons per hour down to low outputs in the ULV range. Ideal for humidification control in greenhouses, general pest control and application of germicides and disinfectants.

All DYNA-FOG electric ULV cold aerosol spray mist applicators feature the full benefit of ultra low volume method of dispensing water or oil based chemical formulations. With over 75 years experience in aerosol application technology, Curtis engineers deliver all the tools and data necessary to accurately determine dispersal flow rates and particle sizes. Included with each machine is a unique Curtis Viscometer which is used to measure the viscosity of your chemicals. The viscosity measurement is then matched to a chart provided in the manual to give precise control valve settings for particle size and formulation output, assuring less waste of chemical and proper compliance with label requirements.

No more guesswork. Now you can apply pesticides deodorants, fungicides, duct sealant, disinfectants, miticides, etc. much safer, more efficiently,  more economically and in a variety of indoor/outdoor applications such as hospitals, schools, homes, hotels, resorts, greenhouses, food processing plants, warehouses, dairy and poultry farms and horse stables.

Specifications

Model 2895 Tornado 110 Volt.
Model 2897 Tornado 220 Volt.






 
Input Power: 110/120 V AC, 8.5 amps,50/60 Hz.
210/250 V AC, 4.2 amps, 50/60 Hz. for model 3004.
Adjustable: 0-5 GPH.
Flow rate: 0-18.5 LPH.
Particle Size: 5-40 microns.
Tank capacity: 3 gal. (11.4 L).
Length: 20 in. (50.8 cm).
Width: 6 in. (15.2 cm).
Height: 26 in. (66.0cm).
Weight empty: 20 lbs. (9.1 kg.)
Shipping data: L x W x H: 28 in. x 23 in. x 9 in.
(71cm x 58 cm x 23 cm)
Weight: 27 lbs. (12.25 kg.),
Volume: 3.35 cubic feet. (0.095 cubic meter).
 
 

Tornado/Flex

The Tornado fitted with an 18 inch (46 cm) flexible hose designed for spraying into normally inaccessible areas such as: under or between kitchen cabinets, under carpets and above ceilings, or through port holes.  

The multi-range Tornado offers a 3 gallon tank, large formulation filter with removable screen and a precision control metering valve that allows adjustable outputs from a heavy mist of 5 gallons per hour down to low outputs in the ULV range. Ideal for humidification control in greenhouses, general pest control and application of germicides and disinfectants.

 

All DYNA-FOG� electric ULV cold aerosol spray mist applicators feature the full benefit of ultra low volume method of dispensing water or oil-based chemical formulations. With over 75 years experience in aerosol application technology, Curtis engineers deliver all the tools and data necessary to accurately determine dispersal flow rates and particle sizes. Included with each machine is a unique Curtis Viscometer which is used to measure the viscosity of your chemicals. The viscosity measurement is then matched to a chart provided in the manual to give precise control valve settings for particle size and formulation output, assuring less waste of chemical and proper compliance with label requirements.

No more guesswork. Now you can apply pesticides, deodorants, fungicides, duct sealant, disinfectants, miticides, etc. much safer, more efficiently,  more economically and in a variety of indoor/outdoor applications such as hospitals, schools, homes, hotels, resorts, greenhouses, food processing plants, warehouses, dairy and poultry farms and horse stables.

Specifications

Model 2895 Tornado 110 Volt.
Model 2897 Tornado 220 Volt.

 
Input Power: 110/120 V AC, 8.5 amps,50/60 Hz (model 2895).
210/250 V AC, 4.2 amps, 50/60 Hz. (model 2897).
Adjustable: 0-5 GPH.
Flow rate: 0-18.5 LPH.
Particle Size: 5-40 microns.
Tank capacity: 3 gal. (11.4 L).
Length: 20 in. (50.8 cm).
Width: 6 in. (15.2 cm).
Height: 26 in. (66.0cm).
Weight empty: 20 lbs. (9.1 kg.)
Shipping data: L x W x H: 28 in. x 23 in. x 9 in.
(71cm x 58 cm x 23 cm)
Weight: 27 lbs. (12.25 kg.),
Volume: 3.35 cubic feet. (0.095 cubic meter).
 

 
   
© 2013 Curtis Dyna-Fog, Ltd. All rights reserved. In addition to the words Dyna-Fog, Dyna-Trax, and Syncroflow, all product names are either a registered trademark or trademark or Curtis Dyna-Fog, Ltd. in the United States and/or other countries. To maintain the highest quality products, Curtis Dyna-Fog, Ltd. reserves the right to make technical modifications at any time without prior notice.